Breathing new life into a faded top or old pair of jeans has never been so easy, with Wash & Dye reviving colour is as simple as it sounds. DYLON Wash & Dye's unique all-in-one formula dyes fabrics as it washes them, so you can achieve an intense new look or take faded greys back to black with minimum effort. DYLON Wash & Dye gives your dark colours renewed intensity with permanent results you can be proud of.

The difference between Dylon Wash & Dye and the other Dylon products is that this product is a ready mix and no salt is required

DYLON Wash & Dye Instructions

DIRECTIONS

1. Wearing rubber gloves, empty Wash & Dye powder into washing machine drum & add dry fabric

2. Immediately run 40°C cotton cycle without pre-wash or economy setting

3. Add normal washing detergent and run 40°C cotton cycle to remove excess dye from fabric and to clean the machine to clean the machine

4. Dry fabric as normal, away from direct sunlight & heat

COLOUR SHADE

The shade will depend on 3 things:

1. FABRIC TYPE:

• Cotton, linen, viscose, will dye to the full shade

• Polyester/cotton & polyester/viscose mixes, will dye to lighter shades

• Wool, silk, polyester, acrylic, nylon & fabrics with special finishes, e.g. 'dry-clean only', cannot be dyed

2. FABRIC AMOUNT:

• Up to 500g fabric (e.g. 1 pair jeans) will dye to the full shade

• A maximum of 1kg can be dyed, to lighter shades

3. FABRIC COLOUR:

• Colour mixing rules apply, e.g. black dye on red fabric gives burgundy. Patterned fabric will often still show through

HELPFUL HINTS

• Only dye up to 1kg fabric and always use whole pack, no more, no less

• Dyeing may not cover stains, faded areas or bleach marks

• After dyeing, wash separately for first few washes to remove any excess dye

• Should any dye be left in machine, add cup of household bleach to drum, add usual detergent & run machine empty on 40°C cycle

• Remember polyester stitching will not dye